NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
ORDER
NonStop NET/MASTER MS Commands
2–182 115412 Tandem Computers Incorporated
ORDER The ORDER command displays messages in chronological order on an OCS window.
In OCS, a group of messages may start in the middle of the roll-delete message area of
an OCS window and wrap around to the top of the message area, followed by the
roll-delete message area delimiter line. You can use this command to reformat the
window so that messages appear chronologically from the top to the bottom of the
OCS window, with the roll-delete message area delimiter line ending the displayed
messages.
The main use of this command is to display roll-delete messages chronologically on an
OCS window. This command does not affect messages in the NRD message display
area. In OCS, this command is assigned by default to the F12 function key.
ORDER
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, except the INIT NCL
procedure, by using the CMD core statement (but not the INTCMD verb).
Example
The following screen shows messages on an OCS window before using the ORDER
command:
(09:12) --------------------- OPERATOR CONTROL SERVICES ----------------------
NNM0602 TRACEFLAGS 0
NNM0999 *END*
SHOW USERS
NNM0656 USERID TERMINAL TYPE PHYSICAL NAME
NNM0657 -------- -------- ---- --------------------
NNM0659 NMTJN #1520654 6530 $ATP2.#TERM1
NNM0658 SYS1BLOG BG-LOG BLOG
NNM0658 SYS1BMON BG-MON BMON
NNM0658 SYS1BSYS BG-SYS BSYS
NNM0658 SYS1EMSP EMS-PROC EMSP
NNM0658 SYS1LOGP LOG-PROC LOGP
NNM0660 6 USERS LOGGED ON
_____________________________________________________________________________
NNM0602 TEDITOBJ $SYSTEM.SYSTEM.TEDIT
NNM0602 TOACT1 DISC
NNM0602 TOACT2 DISC
NNM0602 TOALARM 3
NNM0602 TOSTART NONE
NNM0602 TOTIME1 0.00
NNM0602 TOTIME2 0.00
NNM0602 TRACEFILE
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>