NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
PARAM DSNMPROCESS
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–209
The following table summarizes the PARAM command operands used to define
the attributes of a DSNM process:
Operand Use Comment
PROCESSCLASS N.A. N.A.
PROCESSCPU O The order of this operand in the group of operands that
defines the attributes of the process is not significant.
PROCESSDEBUGTERM N.A. N.A.
PROCESSLIBRARY N.A. N.A.
PROCESSNAME M The order of this operand in the group of operands that
defines the attributes of the process is not significant.
PROCESSOBJECT M The order of this operand in the group of operands that
defines the attributes of the process is not significant.
PROCESSPARAM M The order of this operand in the group of operands that
defines the attributes of the process is not significant.
PROCESSPRIORITY O The order of this operand in the group of operands that
defines the attributes of the process is not significant.
PROCESSSWAPVOL O The order of this operand in the group of operands that
defines the attributes of the process is not significant.
PROCESSWEIGHT N.A. N.A.
DSNMPROCESS M This operand must be last in the group of operands that
defines the attributes of the process.
M Mandatory N.A. Not applicable O Optional
Example
The following example configures the DSNM SNAX event monitor process. A startup
string is passed to the process when started.
PARAM PROCESSCPU=(5,6)
PARAM PROCESSNAME=$ZD40
PARAM PROCESSOBJECT=$SYSTEM.DSNM.SCPE
PARAM PROCESSPARAM=“DSNM ZNNMCONF, COMPONENT SNAX”
PARAM PROCESSPRIORITY=139
PARAM PROCESSSWAPVOL=$DATA2
PARAM DSNMPROCESS=SCPE-SX