NET/MASTER Management Services (MS) Command Reference Manual

New and Changed Information
115412 Tandem Computers Incorporated iii
The Sterling Software services to which NonStop NET/MASTER MS connects,
formerly called NET/MASTER, is now referred to as the SOLVE management
services.
All sections in this manual have minor changes, which include updated screen
displays, examples, and figures. The following sections have major changes:
Notation Conventions
The subsection “Boldface” now precedes the subsection “Underline _.”
Section 1 Introduction to NonStop NET/MASTER MS Commands
The tables have been expanded to include information about the new commands
described in Section 2, “NonStop NET/MASTER MS Commands.”
Section 2 NonStop NET/MASTER MS Commands
This section has a general change, new commands, and changed commands.
General Changes
Many Cautions have been changed to Notes.
For most commands, the final bullet in the subsection “Considerations” listed related
commands with a brief description of the command. The brief description has been
removed.
New Commands
The following commands are new:
LBANNER
NCLQUEUE RESET
NCLQUEUE SET
SHOW NCLQUEUE
TERMINAL LOCK
Changed Commands
The following commands have been changed:
DEBUG SOURCE—The syntax has been corrected; the (default) OFF operand has
been underlined.
FLUSH—The command now flushes a queued or delayed NCL process.
FSTOP—The command now completely shuts down NonStop NET/MASTER MS,
regardless of its operating state.
LTITLE—The description of the command has additional information.