NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
PARAM SECEXIT
NonStop NET/MASTER MS Commands
2–248 115412 Tandem Computers Incorporated
SECEXIT
SECEXIT= process-name [ [, process-name ] … ]
specifies the name(s) of the external security exit process(es) to be used by
NonStop NET/MASTER MS.
You can specify up to 16 security exit processes. If you cannot specify all security
exit process names in a single line, you can repeat the PARAM SECEXIT command
to specify additional security exit process names.
You can specify a unique process name from one through five characters long.
(This includes the initial dollar sign ($) of the process name.) You can specify a
process name in the form:
[ \ sys . ]$ process-name
Considerations
NonStop NET/MASTER MS does not start the specified security exit process(es);
you must start the security exit process(es) externally.
If you include both the PARAM SECEXIT and PARAM SECEXITPROCESS
commands in the configuration file, the PARAM SECEXIT command has
precedence. (If you include both commands, although NonStop NET/MASTER
MS creates the security exit process named by the PARAM SECEXITPROCESS
command, NonStop NET/MASTER MS never uses it. This applies regardless of
the order in which the PARAM SECEXIT and PARAM SECEXITPROCESS
commands appear in the configuration file.) The PARAM SECEXIT command
assumes that each specified security exit process exists.
Example
The following example specifies an external security exit process:
PARAM SECEXIT=$ZSEC