NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
PROFILE
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–271
YES
instructs NonStop NET/MASTER MS to keep your last command after you
enter it from the OCS command input line. This allows you to rapidly reenter
commands. The cursor is positioned at the beginning of the command input
line, on the first character of the command.
NO
instructs NonStop NET/MASTER MS to erase your last command after you
enter it from the OCS command input line.
CMDSEP
specifies whether NonStop NET/MASTER MS recognizes the semicolon (;) as the
command concatenation character.
YES
instructs NonStop NET/MASTER MS to recognize the semicolon (;) as the
command concatenation character.
NO
instructs NonStop NET/MASTER MS not to recognize the semicolon (;) as the
command concatenation character. You are not permitted to use another
character as a command concatenation character; as a result, you cannot
concatenate commands.
CMDSTACK= history-buffer-size
specifies the number of commands NonStop NET/MASTER MS retains in a
history buffer (command stack).
The history buffer keeps commands that you enter from the OCS command input
line. Each OCS window has a history buffer. Using the history buffer allows you
to rapidly reexecute and redisplay previously executed commands.
If you enter two identical commands consecutively, only the first is retained in the
history buffer.
The default maximum size of a history buffer in OCS is 20 commands. You can set
the number of commands retained in a history buffer from 0 through to the
maximum size set by the SYSPARMS CMDSTACK command, usually 99
commands.
You can recall and redisplay commands in the history buffer using the !, ?, CS-,
CS+, FC, and HISTORY commands.
You cannot use this operand to profile a dependent processing environment.