NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW COMMANDS
NonStop NET/MASTER MS Commands
2–314 115412 Tandem Computers Incorporated
SHOW COMMANDS The SHOW COMMANDS command displays information about commands available
within NonStop NET/MASTER MS. You can display all NonStop NET/MASTER MS
commands, only those NonStop NET/MASTER MS commands that you have the
authority to execute, or a particular NonStop NET/MASTER MS command. The
commands displayed depend on the operand used.
SHOW COMMANDS[ ={ OWN | ALL } ]
[ NAME= command-name ]
OWN
specifies only those NonStop NET/MASTER MS commands that you have the
authority to execute.
ALL
specifies all NonStop NET/MASTER MS commands.
NAME= command-name
specifies a particular NonStop NET/MASTER MS command.
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
You cannot use the SHOW COMMANDS command to display the authority level
of the Guardian utilities listed in Appendix A, “Default Authority Levels for
Guardian Utility Commands.”
You cannot use the SHOW COMMANDS command to display utilities added by a
customer using UANCL.