NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW DOMAINS
NonStop NET/MASTER MS Commands
2–320 115412 Tandem Computers Incorporated
SHOW DOMAINS The SHOW DOMAINS command displays information about all or specified domains.
(A domain is a logical division in a network. It includes the Tandem system on which
NonStop NET/MASTER MS is running and all associated devices.) Entering the
SHOW DOMAINS command with no operands displays information about all known
domains.
SHOW DOMAINS[ = domain-id ]
domain-id
specifies a domain ID. NonStop NET/MASTER MS displays information about
the specified domain.
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0072, NNM0073, and NNM0999 indicate the results of this
command. Refer to the NonStop NET/MASTER Messages Manual or NonStop
NET/MASTER MS online help for a description of these messages.
For related information, see the PARAM FEATUREDISABLE command.