NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW ENGINE
NonStop NET/MASTER MS Commands
2–322 115412 Tandem Computers Incorporated
SHOW ENGINE The SHOW ENGINE command displays internal information about the operations of
NonStop NET/MASTER MS processes.
SHOW ENGINE[ ={ process-name | ALL } ]
Note Use this command only when directed by Tandem support personnel.
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0013 through NNM0015 and message NNM0999 indicate the
results of this command. Refer to the NonStop NET/MASTER Messages Manual or
NonStop NET/MASTER MS online help for a description of these messages.
Example
The following example displays information about the operations of the NonStop
NET/MASTER MS process in which you are running. The following screen displays
the results.
SHOW ENGINE=ALL
(10:33) --------------------- OPERATOR CONTROL SERVICES ----------------------
SHOW ENGINE=ALL
NNM0013 NAME READY WAIT IO FILES MEMORY(KB) QUEUES
NNM0015 $I000 ---- not available ----
NNM0014 $I003 2/18 27/72 8/31 8/28 5501/6574 41
NNM0014 $I002 1/11 18/31 1/13 6/14 5055/5550 25
NNM0014 $INNM 1/20 3/21 1/9 3/4 344/1154 5
NNM0014 $I004 1/13 25/45 1/19 21/30 6927/10670 43
NNM0014 $I001 2/44 26/70 1/42 8/57 5848/6574 44
NNM0999 *END*
_____________________________________________________________________________
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>