NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW PARAM
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–369
SHOW PARAM The SHOW PARAM command displays a summary of NonStop NET/MASTER MS
startup parameters. It shows the values of the parameters used in the configuration
file when NonStop NET/MASTER MS was initialized. The command also displays
the name of the configuration file.
SHOW PARAM
Table 2-14 lists operands of the PARAM command whose values are displayed by the
SHOW PARAM command.
Table 2-14. PARAM Operands Displayed by SHOW PARAM Command
CEXCCF INIT NCLOBJLIB SWGUID
CEXDCF LOGFILE1 NCLQUEUESVOL UACAUTH
CIP MDSMAPFILE PNLCUSTSRC UACUTIL
CMDSVR NCLCUSTOBJ PNLDISTSRC UADAUTH
DID NCLCUSTSRC PROCESSCHAR UADUTIL
DSNMSECTION NCLDISTOBJ READY UMSFILE
DSNMSUBVOL NCLDISTSRC SECEXIT
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0605 and NNM0999 indicate the results of this command. Refer to
the NonStop NET/MASTER Messages Manual or NonStop NET/MASTER MS online
help for a description of these messages.
The name of the configuration file used by NonStop NET/MASTER MS is also
shown in the display from this command.