NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW PSNDUSER
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–387
SHOW PSNDUSER The SHOW PSNDUSER command displays information about the users and NCL
processes currently using Pathway server classes that are available for use by NonStop
NET/MASTER MS.
SHOW PSNDUSER
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0320, NNM0321, and NNM0999 indicate the results of this
command. Refer to the NonStop NET/MASTER Messages Manual or NonStop
NET/MASTER MS online help for a description of these messages.
For related information, see the PSNDCTL and SHOW PSND commands.
Example
The following example displays information about users of Pathway server classes
that are available for use by NonStop NET/MASTER MS. The following screen
displays the results.
SHOW PSNDUSER
(15:33) --------------------- OPERATOR CONTROL SERVICES ----------------------
SHOW PSNDUSER
NNM0320 PSNDID USERID NCL-PROC NCLID TX AVG-RT AVG-MSG TIME-OPEN
NNM0321 DYNAMIC NMTJN MAKE_SE* 002010 0000002 001.905 00000068 001130.26
NNM0999 *END*
_____________________________________________________________________________
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>