NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW SYSPARMS
NonStop NET/MASTER MS Commands
2–390 115412 Tandem Computers Incorporated
Table 2-17 lists operands of the SYSPARMS command whose values are not
displayed by the SHOW SYSPARMS command.
Table 2-17. SYSPARMS Operands Not Displayed by SHOW SYSPARMS Command
CMDAUTH MAPDEL PPRELOAD PUNLOAD
CMDREPL MAPLOAD PRELOAD UNLOAD
You use the following commands to display the values of the operands listed in
Table 2-17:
SHOW MAPS for the MAPDEL and MAPLOAD operands.
SHOW PANELS for the PPRELOAD and PUNLOAD operands.
SHOW PRELOAD for the CMDREPL, PRELOAD, and UNLOAD operands.
You can follow sysparms-option by an asterisk (*). In this context, the asterisk
is a wild card.
*
specifies all system parameters.
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0601, NNM0602, and NNM0999 indicate the results of this
command. Refer to the NonStop NET/MASTER Messages Manual or NonStop
NET/MASTER MS online help for a description of these messages.
For related information, see the SYSPARMS command.