NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW TERM
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–395
If a terminal is not open, the Guardian OPEN procedure call opens the
terminal, the information is gathered, and the Guardian CLOSE procedure call
closes the terminal.
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM1200 through NNM1206, NNM1217, NNM0999, and NNM2600
through NNM2612 indicate the results of this command. Refer to the NonStop
NET/MASTER Messages Manual or NonStop NET/MASTER MS online help for a
description of these messages.
When a terminal is opened to gather detailed information, the status of a terminal
that is not defined is NOT OWNED, and the status of a terminal that is defined but
not open is NOT OPENED.
For related information, see the CANCEL, CLOSTERM, OPENTERM, SHOW
TERMDEF, and TERMINAL commands.
Examples
1. The following example displays limited terminal information about all terminals
connected to NonStop NET/MASTER MS. The following screen displays the
results.
SHOW TERM=ALL
(13:58) --------------------- OPERATOR CONTROL SERVICES ----------------------
SHOW TERM=ALL
NNM1217 LOGICALNM DEVICENM CLR HI MDL STATUS
NNM1204 #5166298 $ATPE.#TERM2 Y Y - IN SESSION
NNM1204 #5166305 $ATP3.#TERM2 - - - WAIT LOGON
NNM1204 #5166303 $ATPF.#TERM1 - - 27X132 IN SESSION
NNM1204 #5166302 $ATP2.#TERM1 Y N - IN SESSION
NNM1204 #5166306 $ATP4.#TERM2 - - - WAIT LOGON
NNM1204 #5166414 \SYS2.$ATPP.#TERM1 - - - IN SESSION
NNM1204 #5166333 $ATPZ.#TERM1 - - - SUSPENDED
NNM0999 *END* 7 CONNECTED TERMINALS
_____________________________________________________________________________
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>