NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SHOW UDBUSER
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–409
SHOW UDBUSER The SHOW UDBUSER command displays information about the users and NCL
processes that are currently using user databases (UDBs).
SHOW UDBUSER
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0317, NNM0318, and NNM0999 indicate the results of this
command. Refer to the NonStop NET/MASTER Messages Manual or NonStop
NET/MASTER MS online help for a description of these messages.
For related information, see the SHOW FILES, SHOW UDB, and UDBCTL
commands.
Example
The following example displays users of UDBs. The following screen displays the
results.
SHOW UDBUSER
(06:33) --------------------- OPERATOR CONTROL SERVICES ----------------------
SHOW UDBUSER
NNM0317 FILEID USERID NCL-PROC NCLID TERMINAL BASE-PROC OPENID
NNM0318 MESUDB NMTJN OPEN_FI* 000028 #5441574 MESUDBA MESUDB
NNM0318 MKSUDB NMTJN OPEN_FI* 000031 #5441574 MKSUDBA MKSUDB
NNM0318 DKSUDB NMTJN OPEN_FI* 000034 #5441574 DKSUDBA DKSUDB
NNM0318 DESUDB NMTJN OPEN_FI* 000037 #5441574 DESUDBA DESUDB
NNM0318 UESUDB NMTJN OPEN_FI* 000040 #5441574 UESUDBA UESUDB
NNM0318 UKSUDB NMTJN OPEN_FI* 000043 #5441574 UKSUDBA UKSUDB
NNM0999 *END*
_____________________________________________________________________________
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
PM=>