NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SPLIT
NonStop NET/MASTER MS Commands
2–430 115412 Tandem Computers Incorporated
If you want to split the screen horizontally, position the cursor at the left side
of the screen at the row at which you want to position the top of the new
screen and then press the SPLIT key.
On a Tandem 6530 or compatible terminal, if you have two windows open when
you press the SPLIT key or enter the SPLIT command from the OCS command
input line, NonStop NET/MASTER MS displays the SPLIT grid again. It requests
you to position the cursor at the new split location. After you position the cursor,
press the ENTER key to adjust the size of the windows.
On an IBM 3270 or compatible terminal, if you have two windows open, you must
position the cursor at the side or bottom of the screen before you press the SPLIT
key or enter the SPLIT command. After you position the cursor, press the SPLIT
key to adjust the size of the windows.
If you define a local function key with the SPLIT keyword, this value remains
current while you are logged on to NonStop NET/MASTER MS. The value is not
lost when you exit from OCS.
For related information, see the SWAP command.
Examples
1. The following example splits the screen at row 6. This is a horizontal split. The
following screen displays the results.
SPLIT ROW=6
(11:05) --------------------- OPERATOR CONTROL SERVICES ----------------------
SPLIT ROW=6
---------- ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>
SYS1------- NonStop NET/MASTER MS T6581D30 - 31OCT94 : Primary Menu -------SYS1
Select Option ===>
2 - Operator Control Services Userid NMTTH
8 - Edit Services Term #4803281
E - Console Extras Time 11:05:58
H - Help Maintenance THU 23-JUN-1994
M - User ID Management Services OPSYS GUARDIAN
S - System Support Services Window 2
U - User Services
X - Terminate Window.Exit