NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
STATUS
NonStop NET/MASTER MS Commands
2–434 115412 Tandem Computers Incorporated
STATUS The STATUS command displays the current general system status.
STATUS
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
Messages NNM0608 and NNM0999 indicate the results of this command. Refer to
the NonStop NET/MASTER Messages Manual or NonStop NET/MASTER MS online
help for a description of these messages.
Example
The following example displays the current general status. The following screen
displays the results.
STATUS
(13:08) --------------------- OPERATOR CONTROL SERVICES ----------------------
STATUS
NNM0608 SYSTEM STATUS AS AT 13:08:49
NNM0608 NONSTOP KERNEL VERSION: D20
NNM0608 SYSTEM STATE: RUNNING
NNM0608 SYSTEM WAS INITIALISED ON WED 05-APR-1995 AT 08:31:17
NNM0608 SYSTEM NAME: \SYS1
NNM0608 SYSTEM DOMAIN ID: SYS1
NNM0608 SYSTEM ID: SYS1
NNM0608 SYSTEM NETNAME: SYS1
NNM0608 CONTROL PROCESS NAME: $ZNNM, CPUS: 02 03
NNM0608 CONTROL PROCESS OBJECT FILE: $DATA4.ZNNM.NCP
NNM0608 CONTROL PROCESS HOMETERM: $TRM0.#A
NNM0608 CURRENT ACTIVITY LOG FILE = $DATA4.ZNNMDATA.ZLGFILE1
NNM0608 LOGPROC IS NOT LOADED
NNM0608 EMSPROC IS NOT LOADED
NNM0608 EMS DISTRIBUTOR STOPPED
NNM0608 EMS COLLECTOR STOPPED
NNM0608 CNM SSCP STOPPED
NNM0608 0 REMOTE LINKS ACTIVE, 1 INACTIVE.
NNM0608 PROCESS ACCESSOR ID: 100,0
NNM0608 DSNM IS AVAILABLE
AUTO HOLD ------------------ NonStop NET/MASTER D30 ---------------- --------
M=>