NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SYSPARMS
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–441
SYSPARMS The SYSPARMS command defines and changes NonStop NET/MASTER MS system
parameters. These parameters configure system-wide settings in a NonStop
NET/MASTER MS system. SYSPARMS commands are executed after a NonStop
NET/MASTER MS system is initialized: after all PARAM commands in the
configuration file have been executed. SYSPARMS commands are usually executed in
the first NCL procedure executed by NonStop NET/MASTER MS, the INIT NCL
procedure.
You can modify the value of most system parameters at any time, that is, during and
after execution of the INIT NCL procedure. A few system parameters can be modified
only during execution of the INIT NCL procedure (before users are permitted to log
on to the system); this is indicated in the description of the specific operand.
The default authority level of the SYSPARMS command is 4. The AUTOEXEC and
CMDAUTH operands each have a default authority level of 9. You can enter this
command from any NCL procedure, including the INIT NCL procedure, by using
either the CMD core statement or the INTCMD verb. The SHOW SYSPARMS
command lists the operands of the SYSPARMS command about which you can obtain
information.
SYSPARMS sysparms-option [ sysparms-option … ]
sysparms-option :
AUTOEXEC={ YES | NO | OPSYS | START }
CDELAY= contention-delay
CMDAUTH=( command [ operand ], auth [, operand , opauth ] )
CMDREPL= command
CMDSTACK= maximum-commands
CNMAPPLNME= process-name
CONMSG={ YES | NO }
{ EMSBKGCOLOR | EMSBKGCOLOUR }= color-option
EMSCOLLPNM= process-name
{ EMSCOLOR | EMSCOLOUR }= color-option
EMSDISTBCP= cpu-number
EMSDISTCOLL={ process-name |
( process-name [, process-name ] … ) |
file-name }
EMSDISTFLT={ filter | ( filter [, filter ] … ) | FLUSH }
EMSDISTPCP= cpu-number
EMSDISTPFN= file-name
EMSDISTPNM= process-name
EMSDISTPRI= process-priority
EMSEVENTTD= file-name
EMSFLTLIB= filter-library
{ EMSHLITE | EMSHLIGHT }= hlite-option
EMSLINELEN= line-length
EMSLINENUM= line-number