NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SYSPARMS CMDAUTH
NonStop NET/MASTER MS Commands
2–454 115412 Tandem Computers Incorporated
CMDAUTH
CMDAUTH=( command [ operand ], auth [, operand , opauth ] )
changes the default authority level of a command or command/operand
combination and, optionally, the operand of the command or command/operand
combination for which a higher authority level may apply. The change takes effect
for all users and NCL processes as soon as the PROFILE CMDAUTH command is
processed by NonStop NET/MASTER MS.
command
specifies the name of a command. You can abbreviate the command to the
minimum number of characters that uniquely identify it.
operand
specifies, for commands that share the same first keyword, an additional
keyword that creates a unique command/operand combination. You can
abbreviate the operand to the minimum number of characters that uniquely
identifies it.
auth
specifies the authority level to apply to the command or command/operand
combination. You can specify a value from 0 through 255.
operand
specifies the name of the operand of a command or command/operand
combination. You cannot abbreviate the operand of a command.
opauth
specifies the authority level to apply to the operand of a command or
command/operand combination. You can specify a value from 0 through 255.
Considerations
The CMDAUTH operand has a default authority level of 9.
This system parameter is not included in the display from the SHOW SYSPARMS
command or the display from the Display/Update SYSPARMS Settings option in
System Support Services.
You can use this system parameter to effectively disable a command by allocating
it an authority level higher than the authority level of any user ID.