NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SYSPARMS EMSMAXRATE
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–475
EMSMAXRATE
EMSMAXRATE={ NONE | maximum-message-rate }
specifies the maximum event messages per second that NonStop NET/MASTER
MS reads from the EMS distributor. You can use this operand to limit the rate that
NonStop NET/MASTER MS reads EMS messages from the EMS distributor.
NONE
specifies no maximum rate. NonStop NET/MASTER MS does not limit the
rate at which it reads messages from the EMS distributor.
maximum-message-rate
specifies a maximum message rate. NonStop NET/MASTER MS limits the
rate at which it reads messages from the EMS distributor to the specified
maximum rate.
You can specify a value from 0 through 99.9. From 0 through 0.99, you can
specify a value with two decimal places. From 1 through 99.9, you can specify
a value with one decimal place.
If you specify 0, NonStop NET/MASTER MS suspends reading messages
from the EMS distributor (although the EMS distributor is not stopped). If
you subsequently specify a nonzero value, NonStop NET/MASTER MS
restarts reading messages from the position at which it suspended reading
messages; no messages are duplicated or lost.