NET/MASTER Management Services (MS) Command Reference Manual

LBANNER

SYSPARMS ID

NonStop NET/MASTER MS Commands

115412 Tandem Computers Incorporated 2–481

ID=

system-id

specifies the system identifier by which to identify a NonStop NET/MASTER MS

system.

You can specify a system identifier from 1 through 12 characters long. It is

recommended that you use only alphanumeric characters when you specify a

system identifier.

If you do not specify a system identifier, the default system identifier is the

Expand system name without the leading back slash (\) or ANONYMOUS if the

system is unnamed.

Considerations

You can set this system parameter only during execution of the INIT NCL

procedure (before users are permitted to log on to the system).

The system identifier is required for NonStop NET/MASTER MS to communicate

with the SOLVE management services using Inter-NET/MASTER Connection

(INMC). The system ID must be unique in a network of NonStop NET/MASTER

MS or SOLVE management services systems. (The system identifier is the

functional equivalent of the application name assigned to SOLVE management

services—using the APPLNAME parameter—in a VTAM environment.)

Example

The following example specifies a system identifier of SYSTEM1:

SYSPARMS ID=SYSTEM1