NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SYSPARMS TOACT2
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–539
TOACT2
TOACT2={ timeout-actn-2 | ( timeout-actn-2 , rpt-interval ) }
specifies the action to take when the second terminal timeout interval expires and,
optionally, specifies a repeat interval for the action.
The second terminal timeout interval is specified by the SYSPARMS TOTIME2
command. The SYSPARMS TOACT2 command has no effect unless the timeout
facility is enabled by the SYSPARMS TOSTART command.
You must set a first timeout action before setting a second timeout action.
The timeout actions for timeout-actn-2 and the repeat interval for
rpt-interval are the same as described for timeout-actn-1 and
rpt-interval , respectively, for the SYSPARMS TOACT1 command.
Example
The following example locks the terminal when the second terminal timeout interval
expires:
SYSPARMS TOACT2=LOCK