NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
SYSPARMS TRACEFLAGS
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–545
TRACEFLAGS
TRACEFLAGS= number
specifies a decimal number in which each digit sets a switch that enables (if the
digit is 1) or disables (if the digit is 0) a diagnostic mode of operation.
Note Use this command only when directed by Tandem support personnel.
Example
The following example sets a series of switches:
SYSPARMS TRACEFLAGS=110000000000000000000000000