NET/MASTER Management Services (MS) Command Reference Manual

LBANNER

TERMINAL ADD

NonStop NET/MASTER MS Commands

115412 Tandem Computers Incorporated 2–549

You can specify an asterisk (*) as the last character of a device name. In this

context, the asterisk is a wild card.

Note If the device name you specify is syntactically incorrect, but still begins with a backslash (\) or a dollar sign

($), then the TERMINAL ADD command may still accept the definition. If it does, the error is not detected

until the OPENTERM command attempts to open the terminal.

{ COLOR | COLOUR }

specifies whether color data streams are sent to the terminal. Whether the

terminal displays color depends on the terminal type.

YES

specifies that color data streams are to be sent to the terminal. If you specify

an IBM 3270 or compatible terminal, then extended color data streams are

sent.

Note If the terminal you are defining does not support color and you specify COLOR=YES, unpredictable

results may occur when the terminal is opened.

specifies that color data streams are not to be sent to the terminal. If you

specify COLOR=NO, then HLITE=NO is assumed unless you explicitly specify

HLITE=YES.

TERMCONF

instructs NonStop NET/MASTER MS to query the terminal configuration and

to use the color capability specified there.

{ HLITE | HLIGHT }

specifies whether highlighting data streams are sent to the terminal. Whether the

terminal displays highlighting depends on the terminal type.

YES

specifies that highlighting data streams are to be sent to the terminal. If you

specify an IBM 3270 or compatible terminal, then extended highlighting data

streams are sent.

Note If the terminal you are defining does not support highlighting and you specify HLITE=YES,

unpredictable results may occur when the terminal is opened.