NET/MASTER Management Services (MS) Command Reference Manual

LBANNER

TERMINAL ADD

NonStop NET/MASTER MS Commands

2–550 115412 Tandem Computers Incorporated

specifies that highlighting data streams are not to be sent to the terminal. If

you specify HLITE=NO, then COLOR=NO is assumed unless you explicitly

specify COLOR=YES.

TERMCONF

instructs NonStop NET/MASTER MS to query the terminal configuration and

to use the highlighting capability specified there.

MODEL

specifies the model number of an IBM 3270 or compatible terminal and sets the

terminal characteristics to those of the specified model.

You can specify the following model numbers:

3270-1 3270-3 3270-5

3270-2 3270-4

Note You can specify a model number with a screen size smaller than the actual display size of the device.

However, NonStop NET/MASTER MS truncates screen displays generated by NCL or NonStop

NET/MASTER MS internal routines that exceed the true display size of the device.

TERMCONF

instructs NonStop NET/MASTER MS to query the terminal configuration of

an IBM 3270 or compatible terminal and to use the model number specified

there.

Considerations

The default authority level of this command is 3.

You can enter this command from any NCL procedure, including the INIT NCL

procedure, by using either the CMD core statement or the INTCMD verb.

When you define a terminal by using this command the SHOW TERM command

does not display the terminal and the SHOW TERMDEF command shows the

status of the terminal is UNCONNECTED.

For related information, see the CANCEL, CLOSTERM, OPENTERM, and other

TERMINAL commands.