NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
TRACE trace-spec
NonStop NET/MASTER MS Commands
2–564 115412 Tandem Computers Incorporated
ALL
specifies all internal trace points.
internal-tp-number
specifies an internal trace point number. You must specify a positive integer.
NONE
specifies no internal trace points and resets any that were previously set.
LINK
restricts tracing to or from the specified link(s), or specifies unrestricted tracing by
link. This operand is only meaningful when tracing messages to or from a remote
system.
link-name
specifies the name of the link(s) to a remote system. The link name can be
from 1 through 12 characters long and can include any displayable characters.
Alphabetic characters are not case-sensitive.
You can specify an asterisk (*) as the last character of a link name. In this
context, the asterisk is a wild card.
Note The specified link(s) does not have to be defined or currently active.
ALL
specifies unrestricted tracing; that is, tracing is not restricted to a specific link.
TERMNAME
restricts tracing to or from the specified terminal(s), or specifies unrestricted
tracing by terminal.
When tracing messages, TERMNAME specifies the target terminal(s) associated with
the message flow. When tracing internal events, TERMNAME specifies the terminal
that data is being sent to or received from.