NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
UNIT DELETE
NonStop NET/MASTER MS Commands
115412 Tandem Computers Incorporated 2–589
UNIT DELETE The UNIT DELETE command deletes an Inter-NET/MASTER Connection (INMC)
unit definition record from global memory.
UNIT DELETE= unit-name
unit-name
specifies the name of the unit to the remote system. The unit name can be from 1
through 12 characters long and can include any displayable characters. Alphabetic
characters are not case-sensitive.
Considerations
The default authority level of this command is 3.
You can enter this command from any NCL procedure, including the INIT NCL
procedure, by using either the CMD core statement or the INTCMD verb.
This command does not affect the current operational status of the link to which it
applies. If the link is active, it remains active; if the link is stopped, it remains
stopped; if the link is pending active, it remains pending active.
For related information, see the LINK, PARAM FEATUREDISABLE, SESSION,
SHOW LINKS, and UNIT DEFINE commands.
Example
The following example deletes a unit definition record:
UNIT DELETE=REMOTEU