NET/MASTER Management Services (MS) Command Reference Manual

LBANNER
X
NonStop NET/MASTER MS Commands
2–590 115412 Tandem Computers Incorporated
X The X command exits from Operator Control Services (OCS) and returns to the
top-level NonStop NET/MASTER MS primary menu. A primary menu is a menu
denoted by the display of a user ID and time on the right side of the screen. NonStop
NET/MASTER MS has more than one primary menu: the top-level NonStop
NET/MASTER MS primary menu, which appears when you log on to NonStop
NET/MASTER MS; the User ID Management Services (UMS) primary menu; the
System Support Services primary menu; and so on. This means that a primary menu
may appear under another primary menu.
This command is also assigned by default to the F3 function key; because it ends the
current operation, this function key is called the END key. You can use the END key
to exit to the next higher-level menu in a hierarchy of menus from most locations in
NonStop NET/MASTER MS (not only from OCS).
When you exit from OCS, the following occurs:
Your command processing environment is dismantled.
Your current profile values are reset (except the value specified by the PROFILE
INITCMD command).
Your local function key definitions are reset to global values.
Your local equates are deleted.
Any paused NCL processes are flushed.
Any Guardian processes you have created in OCS by using the OPSYS SEND
command are terminated.
Any queued SIGNON link-name commands to remote systems are removed.
X
Considerations
The default authority level of this command is 0.
You can enter this command from any NCL procedure, except the INIT NCL
procedure, by using the CMD core statement (but not the INTCMD verb).
For related information, see the RETURN command.
Examples
1. The following example exits you from OCS:
X
2. The following example, entered from the OCS command input line, exits NonStop
NET/MASTER MS if one window is operational:
=X