NET/MASTER Management Services (MS) Command Reference Manual

SEGINFO Utility
Default Authority Levels for Guardian Utility Commands
115412 Tandem Computers Incorporated A–25
SCF Utility Table A-62 lists the default authority levels for commands used by the SCF utility.
Table A-62. Default Authority Levels for SCF Utility
Command Authority Level Command Authority Level
∗
255 LOG 4
ABORT 3 MANAGERS 0
ACTIVATE 3 NAMES 0
ADD 4 OBEY 255
AGGREGATE 0 OPEN 0
ALIAS 255 OUT 4
ALLOCATE 3 PAGESIZE 0
ALLOW 0 PAUSE 255
ALLOWOPENS 3 PRIMARY 3
ALTER 4 PROBE 0
ASSUME 0 RELEASE 3
BOOT 3 RENAME 4
CONFIRM 0 REPEAT 0
CONNECT 3 RUN 255
CPUS 0 SETPROMPT 0
DELAY 0 START 3
DELETE 4 STATS 0
DETAIL 0 STATUS 0
DISCONNECT 3 STOP 3
E 0 STOPOPENS 4
ENV 0 SUSPEND 3
EXIT 0 SWITCH 3
HELP 0 SYSTEM 0
INFO 0 TIMEOUT 0
LISTDEV 0 TRACE 3
LISTOPENS 0 VERSION 0
LOAD 3 VOLUME 0
SEGINFO Utility Table A-63 lists the default authority levels for commands used by the SEGINFO
utility.
Table A-63. Default Authority Levels for SEGINFO Utility
Command Authority Level
∗
4