NET/MASTER Management Services (MS) Operator's Guide

The Capture Buffer
System Support Services
106379 Tandem Computers Incorporated 5–9
3. To reexecute a command from the command stack:
a. Position your cursor to the left of the command and type S.
b. Press the ENTER key to return to the Command Entry screen. The selected
command appears in the COMMAND field.
c. Press the ENTER key to execute the command.
If the Utility column is not blank for a command and the command is not prefixed
with a slash (/), the command is sent to the utility if selected.
4. To delete a command from the command stack:
a. Position your cursor to the left of the command and type D.
b. Press the ENTER key to delete the command from the command stack.
c. Press the F3 (PF03) or F4 (PF04) function key to return to the Command Entry
screen.
The Capture Buffer Commands, responses, and (optionally) unsolicited messages are saved in a capture
buffer. When the capture buffer is full, the Command Entry facility only puts more
messages into it if the WRAP option is ON, in which case the oldest messages are
deleted to make room for new messages.