NET/MASTER Management Services (MS) Operator's Guide
Marking and Locating a Position in the Activity Log
Examining the Activity Log
6–14 106379 Tandem Computers Incorporated
To find the records generated from the terminal #9770012, enter the following
command in the command line and press the ENTER key:
F T #9770012
14:36:52 --- Log LOGFILE1 (\SYS1.$DATA4.ZNNMDATA.ZLGFILE1) for 10-NOV-1994 ----
COMMAND ==> DISPLAY >> 13:50:32
NNM1537 TERM '#9770012' FOUND RANGE >> 13:50:33
TIME TERM USER TEXT
13:50:32 #9770012 NMTJN START INITCMD
13:50:33 #9770012 NMTJN equate zzz show users
13:50:33 #9770012 NMTJN NNM0235 TEXT SET FOR EQUATE STRING ZZZ
13:50:33 #9770012 NMTJN PROFILE RDMIN=99
13:50:33 #9770012 NMTJN PROFILE CMDSTACK=99
13:50:33 #9770012 NMTJN PROFILE EMS=YES
13:50:33 #9770012 NMTJN PROFILE ROLL=0
13:50:33 #9770012 NMTJN PROFILE NCLTEST=YES
13:50:33 #9770012 NMTJN PROFILE CMDKEEP=NO
13:50:33 #9770012 NMTJN PROFILE TRUNC=NO
13:50:33 #9770012 NMTJN PROFILE INDENT=8
13:50:33 #9770012 NMTJN PROFILE PREFEMS=BOTH
13:50:33 #9770012 NMTJN PROFILE PRFTM=YES
13:50:33 #9770012 NMTJN PROFILE UNSOL=YES
13:50:33 #9770012 NMTJN PROFILE MONMSG=YES
13:50:33 #9770012 NMTJN TITLE OPERATOR CONTROL SERVICES
13:50:33 #9770012 NMTJN NNM1005 START INITCMD PROCESSING COMPLETE. NCLID
001502
13:50:33 #9770012 NMTJN NNM0357 PROFILE HAS CHANGED
13:50:33 #9770012 NMTJN NNM0357 PROFILE HAS CHANGED
Marking and Locating a
Position in the Activity Log
You can mark a position in the activity log and then use the LOCATE command to
return directly to that position.
Marking a Position
To mark a position, follow these steps:
1. Enter a period (.) followed by a one to eight-character label in the command line:
.
label
2. Perform one of the following steps:
Press the ENTER key to associate the first record displayed on the screen with
the specified label.
Position the cursor to the left of the line you wish to be associated with the
label and then press the ENTER key.
Any number of labels may be defined, and a previously used label may be redefined
to a new position.
Note The labels FSTART and FEND have special meanings. See “Changing the Search Scope,” later in this
section, for more information.