NET/MASTER Management Services (MS) Operator's Guide
Getting Help for DSNM Subsystem Commands
Accessing External Utilities and Applications
106379 Tandem Computers Incorporated 7–5
You can issue a ROUTE link-name OPSYS command to a NonStop NET/MASTER MS
system, directing a DSNM command to it, from a SOLVE management services or
NetView system running on an IBM platform.
You can issue a ROUTE link-name OPSYS command to send a DSNM command to a
remote Tandem system running NonStop NET/MASTER MS or to send a console
command to a remote IBM system running the SOLVE management services. See
Section 8, “Communicating With Remote Systems,” for more information.
Each DSNM subsystem command has a command authority level associated with it.
You may not have access to all the DSNM subsystem commands. If your authority
level is not high enough for you to do your job, see your system manager.
Note DSNM must be operational in order for OPSYS commands to work. If you get an error message when
you try to issue an OPSYS command, enter the NonStop NET/MASTER MS STATUS command to find
out the status of DSNM.
Examples
The following example assumes that a group named ALL-SNAX has been set up with
the Distributed Name Service (DNS). To request the aggregate status of all the SNAX
objects in the ALL-SNAX group, enter the following command:
OPSYS AGGREGATE ALL-SNAX
To start all Pathway terminals under the manager process $PMOR, enter the following
command:
OPSYS START TERM * UNDER $PMOR
The next example assumes that a group named ORL-SNAX has been set up with the
Distributed Name Service (DNS). To stop the PUs and LUs that are subordinate to the
lines in the group ORL-SNAX without stopping the lines themselves, enter:
OPSYS STOP ORL-SNAX, SUBONLY
Getting Help for DSNM
Subsystem Commands
To display help for any of the DSNM subsystem commands, enter
OPSYS dsnm-subsystem-command
in the command input line and press the F1 (PF01) function key. For example, type
OPSYS statistics in the command input line and press F1 to display help for the
DSNM subsystem command STATISTICS.
To display help on how to specify objects in a DSNM command, enter the following
command in the command input line and press the F1 (PF01) function key:
DSNMOBJ
To display help on DSNM command modifiers, enter the following command in the
command input line and press the F1 (PF01) function key:
DSNMMODS