NET/MASTER Management Services (MS) Operator's Guide

Entering the Console Extras Facility
Accessing External Utilities and Applications
106379 Tandem Computers Incorporated 7–29
The Console Extras
Facility
The Console Extras facility provides a user interface that facilitates your use of the
predefined PROGRUN utilities and the NetStatus startup NCL procedure NETSTAT.
Using this facility, you do not need to enter the PROGRUN command or NETSTAT.
You access the utility by selecting the utility through your Console Extras Utility List
panel.
This facility allows you to access external utilities that exist on your system. The
interface is a panel that provides up to 16 external utilities that you can access. You
can ask your system manager to customize your Console Extras utility list panel.
Entering the Console
Extras Facility
Select option E from the NonStop NET/MASTER MS Primary Menu screen to display
a Console Extras Utility List screen similar to the following:
SYS1--------------------- Console Extras : Utility List ---------------ZCEXMNLP
Command ===>
S/B=Browse R=Run
Utility Description
DSMPM Distributed Systems Management/Problem Manager
EMSA Event Management Service Analyzer
NETSTATUS Distributed Systems Management Solutions NetStatus
OMF Object Monitoring Facility
VIEWSYS System Resource Monitor Utility
**END**
F1=Help F2=Split F3=Exit F4=Return
F9=Swap
Note Console Extras supports utilities for 6530 and compatible terminals, 3270 and compatible terminals, or
both. The Console Extras Utility List screen does not display configured utilities that are not supported on
the type of terminal that you are using.
The displayed list of utilities is determined as follows:
1. If you have your own Console Extras utility list, then your own list is displayed.
2. If you do not have your own Console Extras utility list, then the customized
Console Extras utility list is displayed.