NET/MASTER Management Services (MS) Operator's Guide

Where to Go for More Information
About This Manual
106379 Tandem Computers Incorporated xix
Where to Go for More
Information
Because it is not possible to know exactly which tasks may be required of operators at
a particular installation, the NonStop NET/MASTER MS Operator’s Guide might not
provide all the information you need to get your job done. For example, at some sites,
tasks described in the NonStop NET/MASTER MS System Management Guide may be
tasks that are routinely performed by those we have identified as system or network
“operators.” For more information on NonStop NET/MASTER MS, you should
consult the:
NonStop NET/MASTER MS Command Reference Manual, for the complete syntax,
default authority level, usage considerations, and examples of all NonStop
NET/MASTER MS commands.
NonStop NET/MASTER MS System Management Guide, for all the information
required to plan for, install, customize, and support NonStop NET/MASTER MS
on a Tandem system.
NonStop NET/MASTER Messages Manual, for an explanation of all messages,
event-message tokens, and NCL error codes issued by NonStop NET/MASTER
MS. For messages, the manual includes probable causes, effects, and recovery
actions.
NonStop NET/MASTER NCL Programmer’s Guide, for an overview of NCL concepts
and terms, and how to use NCL.
NonStop NET/MASTER NCL Reference Manual, for a complete description of NCL
constructs.
NonStop NET/MASTER RMS Management and Operations Guide, for information on
using RMS.
You may also find the following reference summaries helpful as you are using
NonStop NET/MASTER MS and NCL:
NonStop NET/MASTER MS Command Reference Summary, for a summary of all
NonStop NET/MASTER MS commands.
NonStop NET/MASTER NCL Reference Summary, for a summary of NCL constructs.
You might need more information about the Tandem products that can be accessed
from NonStop NET/MASTER MS. Distributed Systems Network Management
(DSNM) is a prerequisite product for NonStop NET/MASTER MS, and NetStatus is an
optional network monitoring application that can be used directly from NonStop
NET/MASTER MS. For information about these products, refer to the:
User’s Guide to DSNM Commands, which describes the DSNM command set.
NetStatus User’s Guide, which provides instructions for using NetStatus to perform
network management tasks.
In addition, if you are involved with configuring DSNM, you will require the
Distributed Systems Management Solutions (DSMS) System Management Guide, which
contains step-by-step instructions for installing, configuring, and managing DSNM.
(This manual lists other manuals that are helpful when you are installing DSNM.)