NET/MASTER Management Services (MS) System Management Guide

Securing External Utilities
Managing Access to External Utilities and Applications
6–36 115414 NonStop NET/MASTER MS System Management Guide
4. Press the ENTER key.
The UMS : Utility Command Set List panel, shown next, appears on your screen.
YAMMER----------------- UMS : Utility Command Set List ----------------ZUMSCSLP
Command ===> Scroll ===> PAGE
S/B=Browse C=Copy D=Delete U=Update
Utility
Name Type Same as Commands
ACTIVATE O *
ADDUSER O *
AID P *
ALARMOFF O *
ALTPRI O *
APCCOM O * ABEND ACTIVATE DEACTIVATE E ENV
ATTACHSEG O *
BACKUP O *
BATCHCOM O * ABORT ACTIVATE ADD ALTER ASSUME
BUSCMD O *
CMI O * ABORT ACTIVATE ADD ALLOW ALTER
COPYDUMP O *
COUP O * ADD ALTER ASSUME CONFIG DELAY
CREATE O *
CUP 0 * ADD ALTER BREAK CLEAR CONNECT
DCOM 0 *
F1=Help F2=Split F3=Exit F4=Return F6=Refresh
F7=Backward F8=Forward F9=Swap
The fields in the Commands column display only as many of the command names
as the screen permits; no indication is given if there are more commands than
appear on the screen.
All fields on this panel are for display only, except the following:
Command
Scroll
The unlabeled action selection field at the left end of each line of the table
You can add, modify, browse, or delete utility command set definition records by
entering an action code in the field on the left of the utility name. To issue commands
from this panel, follow these steps:
1. Enter an action code in the field directly left of the name of each utility whose
command set definition record you want to select.
You can mark more than one entry. NonStop NET/MASTER MS performs each
operation specified on each marked record. Valid action codes include the
following:
B or S BROWSE command
C COPY command
D DELETE command
U UPDATE command