NET/MASTER Management Services (MS) System Management Guide

Operating Modes
Configuring the Processing Environment
11–26 115414 NonStop NET/MASTER MS System Management Guide
Operating Modes NonStop NET/MASTER MS can run in one of three operating modes: basic, extended
basic, and advanced. All modes must include the following processes, each of which
normally runs as a process pair:
NCP
GMM processes
Security exit processes
The different modes are distinguished by the use of different application process
classes. Each operating mode addresses different management operations objectives.
This subsection discusses the following topics:
Basic mode
Changing from basic mode to extended basic mode
Changing back from extended basic mode to basic mode
Extended basic mode
Changing from extended basic mode to advanced mode
Changing back from advanced mode to extended basic mode
Advanced mode
Monitoring performance using Measure
Basic Mode In a NonStop NET/MASTER MS system running in basic mode, one static or dynamic
NC process is present, but no BK, EM, IS, or MS processes are present. The NC
process combines the functions of the BK, EM, IS, and MS process classes.
Figure 11-1 shows the NonStop NET/MASTER MS programs and processes used in
basic mode. This figure shows that four program files are required in basic mode:
NCP, NGM, SECEXIT, and NMxxssdd. The figure shows that the NC process is
created from the NMxxssdd program file.