NET/MASTER Management Services (MS) System Management Guide

Sample CONFIG File Segment for Extended Basic Mode
Sample CONFIG File Segments
115414 NonStop NET/MASTER MS System Management Guide C–3
Sample CONFIG File
Segment for Extended
Basic Mode
The following sample CONFIG file is a commented out version of a file segment that
supplies application process definitions to run NonStop NET/MASTER MS in
extended basic mode. The sample assumes a Tandem computer system with four
CPUs (0 through 3). The process definitions create the following processes:
Two GMM processes
One static NC process
One dynamic IS process
One dynamic MS process
Two security exit processes
==
== Configure CPUs
==
== PARAM CPUWEIGHT=(0,100)
== PARAM CPUWEIGHT=(1,100)
== PARAM CPUWEIGHT=(2,100)
== PARAM CPUWEIGHT=(3,100)
==
== Global Memory Manager (GMM) Processes
==
== PARAM PROCESSOBJECT=$DATA.ZNNM.NGM
== PARAM PROCESSCPU=(0,1)
== PARAM PROCESSPRIORITY=155
== PARAM PROCESSSWAPVOL=$DATA
== PARAM GMMPROCESS=GMM_1
==
== PARAM PROCESSOBJECT=$DATA.ZNNM.NGM
== PARAM PROCESSCPU=(2,3)
== PARAM PROCESSPRIORITY=155
== PARAM PROCESSSWAPVOL=$DATA
== PARAM GMMPROCESS=GMM_2
==
== Static NC Process
==
== PARAM PROCESSOBJECT=$DATA.ZNNM.NMNC
== PARAM PROCESSCLASS=NC
== PARAM PROCESSCPU=(1,0)
== PARAM PROCESSPRIORITY=147
== PARAM PROCESSSWAPVOL=$DATA
== PARAM STATICPROCESS=NC_S01
==
== Dynamic IS process
==
== PARAM PROCESSOBJECT=$DATA.ZNNM.NMNC
== PARAM PROCESSCLASS=IS
== PARAM PROCESSPRIORITY=143
== PARAM PROCESSSWAPVOL=$DATA1
== PARAM PROCESSWEIGHT=10
== PARAM DYNAMICPROCESS=IS_D01
==
== Dynamic MS process
==
== PARAM PROCESSOBJECT=$DATA.ZNNM.NMNC