NET/MASTER Management Services (MS) System Management Guide

Phase 6: View Status of the NonStop NET/MASTER MS Environment
Starting NonStop NET/MASTER MS
115414 NonStop NET/MASTER MS System Management Guide 2–25
4. Reenter the new password, and press the F3 function key.
NonStop NET/MASTER MS updates the user ID definition record, returns you to
the User ID Management Services Primary Menu, and displays a confirmation
message on the third line of the panel:
NNM0790 PASSWORD AND/OR USER DETAILS FOR USER DERRIDA
UPDATED
The message is also sent to the activity log.
Phase 6: View Status
of the NonStop
NET/MASTER MS
Environment
After starting NonStop NET/MASTER MS, you should view information about its
environment to verify that the system started completely. You can obtain such
information by issuing NonStop NET/MASTER MS and TACL commands from the
Operator Control Services (OCS) window.
For additional information about OCS, refer to the NonStop NET/MASTER MS
Operator’s Guide. If you are installing NonStop NET/MASTER MS for the first time,
consider referring to that manual while you proceed with the tasks described in this
phase.
Move to the OCS window by selecting option 2 from the NonStop NET/MASTER MS :
Primary Menu panel and pressing the ENTER key. Enter commands by typing them
in the command area at the bottom of the window and pressing the ENTER key.
Viewing an Environment
Summary
Use the STATUS command to display summary information about the current
NonStop NET/MASTER MS environment. Information about the current NonStop
NET/MASTER MS environment appears on the screen, as shown next:
(09:22) --------------------- OPERATOR CONTROL SERVICES ----------------------
STATUS
NNM0608 SYSTEM STATUS AS AT 09:22:39
NNM0608 NONSTOP KERNEL VERSION: D30
NNM0608 SYSTEM STATE: RUNNING
NNM0608 SYSTEM WAS INITIALISED ON THU 10-NOV-1994 AT 07:25:12
NNM0608 SYSTEM NAME: \SYS1
NNM0608 SYSTEM DOMAIN ID: SYS1
NNM0608 SYSTEM ID: SYS1
NNM0608 SYSTEM NETNAME: SYS1
NNM0608 CONTROL PROCESS NAME: $ZNNM, CPUS: 00 01
NNM0608 CONTROL PROCESS OBJECT FILE: $USER.ZNNM.NCP
NNM0608 CONTROL PROCESS HOMETERM: $OSP
NNM0608 CURRENT ACTIVITY LOG FILE = $USER.ZNNMDATA.ZLGFILE1
NNM0608 LOGPROC IS NOT LOADED
NNM0608 EMSPROC IS NOT LOADED
NNM0608 EMS DISTRIBUTOR STOPPED
NNM0608 EMS COLLECTOR STOPPED
NNM0608 CNM SSCP STOPPED
NNM0608 0 REMOTE LINKS ACTIVE, 0 INACTIVE.
NNM0608 PROCESS ACCESSOR ID: 100,0
NNM0608 DSNM IS AVAILABLE
AUTO HOLD ------------------ NonStop NET/MASTER D30 ---------------- --------
M=> STATUS