NET/MASTER Messages Manual

NNM0365
Messages
2–86 106159 Tandem Computers Incorporated
NNM0365 ( initcmd ) text1 INITIAL CMD text2 string .
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the INITCMD operand. INITCMD specifies the
command that automatically executes when you enter OCS.
initcmd is the value of the operand.
text1 text2 are parts of the operand description.
string is the initial command string.
The message text is one of the following:
(INITCMD=....) INITIAL CMD HAS NOT BEEN SET.
(INITCMD=....) INITIAL CMD IS string.
Effect. The information about INITCMD is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0366 ( monmsg ) MONITOR CLASS MESSAGES WILL text .
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the MONMSG operand. MONMSG specifies whether
you can receive monitor-class messages.
monmsg is the value of the operand.
text is part of the operand description.
The message text is one of the following:
(MONMSG=NO...) MONITOR CLASS MESSAGES WILL NOT BE DISPLAYED.
(MONMSG=YES..) MONITOR CLASS MESSAGES WILL BE DISPLAYED.
Effect. The information about MONMSG is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.