Manualshelf

NET/MASTER Messages Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
101102103104105106107108109110
NNM0369
Messages
2–88 106159 Tandem Computers Incorporated
NNM0369 (
msgcode
) CURRENT MESSAGE CODE SETTING IS
num
.
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the MSGCODE operand. MSGCODE contains the
hexadecimal message code that is used to filter the receipt of messages from NCL
procedures.
msgcode
is the value of the operand.
num
is the hexadecimal message code.
For example,
(MSGCODE=00..) CURRENT MESSAGE CODE SETTING IS 00.
Effect. The information about MSGCODE is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0370 NOT AUTHORIZED TO RECEIVE EMS MESSAGES
Cause. A PROFILE command was issued and the message is part of the response. The
environment was not authorized to receive EMS messages.
Effect. The message is displayed if the environment is not authorized to receive EMS
messages.
Recovery. This message is informational only; no recovery action is necessary. If you
need to receive EMS messages, ask your system manager to update the OCS details in
your user definition.