NET/MASTER Messages Manual

NNM0381
Messages
106159 Tandem Computers Incorporated 2–93
NNM0379 MSGCODE VALUE EXCEEDS AUTHORIZED RANGE
Cause. A PROFILE MSGCODE=nn command was issued where nn is a new message
delivery code. You cannot use this command to select a delivery code that requires an
authority level that is higher than the value set in your user ID definition record.
Effect. The command fails. The message code remains unchanged.
Recovery. This message is informational only; no recovery action is necessary. If you
want to change the message code, you must select a value that is not higher than the
value set in your user ID definition record and issue the command again.
NNM0380 (GUID= group , user ) CURRENT GUARDIAN USERID IS group , user .
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the GUID operand. GUID specifies your current
Guardian user ID. group and user form the value of the operand and are also part of
the operand description.
For example,
(GUID=100,037) CURRENT GUARDIAN USERID IS 100,037.
Effect. The information about GUID is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0381 USERID: userid TERMINAL-ID: logitermname
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the user and the terminal.
userid is the ID of the user.
logitermname is the logical name of the terminal.
For example,
USERID: NMTHY TERMINAL-ID: #0727701
Effect. The ID of the user and the logical name of the terminal are retrieved and
displayed.
Recovery. This message is informational only; no recovery action is necessary.