NET/MASTER Messages Manual

NNM0385
Messages
106159 Tandem Computers Incorporated 2–95
NNM0384 AUTOHOLD text state auto
Cause. An AUTOHOLD or PROFILE command was issued. The message contains
information about the AUTOHOLD setting. AUTOHOLD specifies whether to roll or
to hold roll-delete messages.
text is part of the description and is one of the following:
MODE SET TO indicates that an AUTOHOLD command was
issued.
SETTING IS indicates that a PROFILE command was issued.
state is OFF or ON.
auto is AUTO or NOAUTO.
For example, a response to the PROFILE command can be
AUTOHOLD SETTING IS OFF AUTO.
Effect. The information about AUTOHOLD is displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0385 AUTHORITY LEVEL IS level , text .
Cause. A PROFILE command was issued, and the message is part of the response. The
line contains information about the authority level of the user and the status of
MSGPROC.
level is the authority level of the user: 0 through 255.
text is part of the description and is one of the following:
NO MSGPROC DEFINED
MSGPROC procname ACTIVE
MSGPROC procname INACTIVE
MSGPROC NOT RUN FOR OPSC USER
procname is the name of the NCL procedure used as MSGPROC.
For example,
AUTHORITY LEVEL IS 255, NO MSGPROC DEFINED.
Effect. The information about the authority level and MSGPROC is retrieved and
displayed.
Recovery. This message is informational only; no recovery action is necessary.