NET/MASTER Messages Manual

NNM0386
Messages
2–96 106159 Tandem Computers Incorporated
NNM0386 USER SERVICES PROCEDURE: userproc
Cause. A PROFILE command was issued and the message is part of the response. The
line contains information about the user services NCL procedure. The procedure
provides access to certain installation-specific applications.
userproc is the name of the procedure.
Effect. The name of the user services procedure is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0387 ( prefems ) text
Cause. A PROFILE command was issued, and the message is part of the response. The
line contains information about the PREFEMS operand. PREFEMS specifies whether
EMS events are prefixed by the Tandem process name (or cpu,pin where cpu is the
processor number and pin is the process identification number) and/or the system
name of the process that generated them.
prefems is the value of the operand.
text is part of the operand description.
The message text is one of the following:
(PREFEMS=NONE) EMS EVENTS WILL NOT HAVE PROCESS/SYSTEM NAME PREFIX.
(PREFEMS=SYST) EMS EVENTS WILL HAVE SYSTEM NAME PREFIX.
(PREFEMS=PROC) EMS EVENTS WILL HAVE PROCESS NAME PREFIX.
(PREFEMS=BOTH) EMS EVENTS WILL HAVE PROCESS AND SYSTEM NAME PREFIX.
Effect. The information about PREFEMS is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.
NNM0388 EMS MESSAGE DELIVERY DETAILS:
Cause. A PROFILE command was issued, and the message is part of the response. The
line introduces information about the delivery of EMS messages that is in a following
message (NNM0370 or NNM0390).
Effect. The message is displayed.
Recovery. This message is informational only; no recovery action is necessary.