NET/MASTER Messages Manual

NNM0393
Messages
2–98 106159 Tandem Computers Incorporated
NNM0393 MSGPROC PROCESSING ACTIVATED
Cause. A PROFILE MSGPROC=procname command was issued and the request to start
the NCL procedure (procname) as MSGPROC was successful.
Effect. The procedure is started as MSGPROC.
Recovery. This message is informational only; no recovery action is necessary.
NNM0394 SESSION TERMINATED ON USER REQUEST
Cause. The NCL verb QEXIT was issued and the session for the user that started the
NCL procedure terminated.
Effect. The current session is terminated.
Recovery. This message is informational only; no recovery action is necessary.
NNM0395 WARNING - EMS SELECTED BUT EMS FUNCTION NOT ACTIVE
Cause. A PROFILE EMS=INFO|NORM|SER|WARN command was issued to change
the severity level of the messages you want to receive but the value of the EMS profile
parameter is NO. This message is issued whenever the severity level is changed while
the receipt of EMS and PPO messages is disabled.
Effect. The receipt of EMS and PPO messages remains disabled but the severity level of
the EMS and PPO messages that are to be received (if enabled later) is changed.
Recovery. You can issue the PROFILE EMS=YES command to enable the receipt of
EMS and PPO messages.