NET/MASTER Messages Manual

NNM0556
Messages
106159 Tandem Computers Incorporated 2–111
NNM0556 OBJECT= objfile CPUS= cpu1 : cpu2 WEIGHT= weight class
Cause. A SHOW PROCESS command was issued, and the message is part of the
response. The line contains information about the definition for the process.
objfile is the name of the program (object file of the process).
cpu1 cpu2 are the CPUs on which the process can run. The values are in the range
00 through 15.
weight is the CPU loading for a dynamic process. The values are in the range
00 through 100 (a larger number indicates a higher CPU resource
consumption). If the process is not dynamic, weight is 00.
class appears as CLASS=process_class for a dynamic or static process;
otherwise, it is blank. process_class is one of the following:
BK indicates a background services process class.
EM indicates an event management services process class.
IS indicates an inter-system services process class.
MS indicates a multi-user services process class.
NC indicates a NonStop NET/MASTER MS consolidated
services process class.
Effect. The information is retrieved and displayed.
Recovery. This message is informational only; no recovery action is necessary.