NET/MASTER Messages Manual

NNM0570
Messages
106159 Tandem Computers Incorporated 2–115
NNM0567 SYSTEM IS ALREADY STOPPING
Cause. A SHUTDOWN or FSTOP command was received while the NonStop
NET/MASTER MS system was in the last stage of a shutdown.
Effect. The NonStop NET/MASTER MS system continues to complete the shutdown.
Recovery. This message is informational only; no recovery action is necessary.
NNM0568 PROCESS process_name STOPPED
Cause. The control process stopped a process during shutdown.
process_name is the name of the stopped process.
Effect. The process is stopped.
Recovery. This message is informational only; no recovery action is necessary.
NNM0569 ALL PROCESSES HAVE STOPPED
Cause. All NonStop NET/MASTER MS processes (including the control process) have
stopped and shutdown is complete.
Effect. All processes in the NonStop NET/MASTER MS system are stopped.
Recovery. This message is informational only; no recovery action is necessary.
NNM0570 UNABLE TO START ALL GMM PROCESSES
Cause. One of the GMM processes could not be started during the initialization of the
NonStop NET/MASTER MS system but the system requires all of them to be started.
Common causes are:
GMM object file is not present
GMM object file is secured such that it cannot be accessed by the NonStop
NET/MASTER MS system
Not enough system resources to run the process (such as disk swap space)
Effect. Initialization of the NonStop NET/MASTER MS system is stopped.
Recovery. Examine the EMS log to determine the reason for the failure. After you have
corrected the problem, restart the NonStop NET/MASTER MS system.