NET/MASTER Messages Manual

NNM0571
Messages
2–116 106159 Tandem Computers Incorporated
NNM0571 UNABLE TO START ALL SECEXIT PROCESSES
Cause. One of the security exit processes could not be started during the initialization
of the NonStop NET/MASTER MS system but the system requires all of them to be
started. Common causes are:
Security exit object file is not present
Security exit object file is secured such that it cannot be accessed by the NonStop
NET/MASTER MS system
Not enough system resources to run the process (such as disk swap space)
Effect. The initialization of the NonStop NET/MASTER MS system is stopped.
Recovery. Examine the EMS log to determine the reason for the failure. After you have
corrected the problem, restart the NonStop NET/MASTER MS system.
NNM0572 UNABLE TO START ALL DSNM PROCESSES
Cause. One of the DSNM processes could not be started during the initialization of the
NonStop NET/MASTER MS system but the system requires all of them to be started.
Common causes are:
DSNM object file is not present
DSNM object file is secured such that it cannot be accessed by the NonStop
NET/MASTER MS system
Not enough system resources to run the process (such as disk swap space)
Effect. The initialization of the NonStop NET/MASTER MS system is stopped.
Recovery. Examine the EMS log to determine the reason for the failure. After you have
corrected the problem, restart the NonStop NET/MASTER MS system.
NNM0573 PROCESS NOT NAMED
Cause. During the startup of your NonStop NET/MASTER MS system, a process that
must be executed as a named process was started without a process name.
Effect. The startup of the NonStop NET/MASTER MS system is stopped.
Recovery. If the process is NCP, assign a name to the process using the NAME option
in the RUN command and restart the NonStop NET/MASTER MS system.
If the process is GMM, the process name is assigned by NCP and this error should not
occur. Contact your Tandem support representative.