NET/MASTER Messages Manual

NNM0575
Messages
106159 Tandem Computers Incorporated 2–117
NNM0574 INVALID BACKUP CPU
Cause. During the startup of your NonStop NET/MASTER MS system, a process was
started with an invalid backup CPU. The backup CPU number cannot be higher than
the highest CPU number configured on your Tandem system.
Effect. The startup of the NonStop NET/MASTER MS system is stopped.
Recovery. If the process is NCP, assign a valid CPU number for the backup NCP
process in the RUN command.
If the process is GMM, assign a valid CPU number for the backup GMM process using
PARAM PROCESSCPU in the NonStop NET/MASTER MS configuration file.
After you have corrected the problem, restart the NonStop NET/MASTER MS system.
NNM0575 PREMATURE TAKEOVER
Cause. A primary NonStop NET/MASTER MS process failed before initialization
completed. The backup process did not have enough information to enable the
initialization to continue.
Effect. The process abends and processing cannot be continued by NonStop
NET/MASTER MS.
Recovery. Examine the EMS log to determine the reason for the failure. After you have
corrected the problem, restart the NonStop NET/MASTER MS system.
If this problem persists, contact your Tandem support representative.