NET/MASTER Messages Manual

NNM0576
Messages
2–118 106159 Tandem Computers Incorporated
NNM0576 UNABLE TO READ STARTUP MESSAGE
Cause. An I/O error occurred when a NonStop NET/MASTER MS process was
reading its startup message.
Effect. The process abends and processing cannot be continued by NonStop
NET/MASTER MS.
Recovery. Examine the EMS log to determine the reason for the failure. After you have
corrected the problem, restart the NonStop NET/MASTER MS system.
If this problem persists, contact your Tandem support representative.
NNM0577 INCORRECT OS VERSION
Cause. You attempted to start NonStop NET/MASTER MS on a Tandem system that
was using a wrong version of the operating system. NonStop NET/MASTER MS
requires operating system release D30.00 or later.
Effect. The NonStop NET/MASTER MS system is not started.
Recovery. Install the correct operating system, then restart your NonStop
NET/MASTER MS.
NNM0578 TOO MANY BACKUP TAKEOVERS
Cause. A NonStop NET/MASTER MS process that ran as a process pair had to switch
over to the backup process too many times, indicating an unstable processing
environment.
Effect. All NonStop NET/MASTER MS processes are stopped.
Recovery. Examine the EMS log to determine the reason for the failure. After you have
corrected the problem, restart the NonStop NET/MASTER MS system.
If this problem persists, contact your Tandem support representative.