NET/MASTER Messages Manual

NNM0585
Messages
2–122 106159 Tandem Computers Incorporated
ERROR error-number
A Guardian file-system error occurred. Use error - number to determine the
appropriate action to take.
INVALID PROCESS NAME
You specified an invalid process name. Correct the name and reissue the
command.
INVALID PROCESS TYPE
You issued a PROCESS ALTER or PROCESS SWITCH command on a process that
is not an NCP, GMM, or security exit process.
NO BACKUP PROCESS
You issued the PROCESS SWITCH command on a process that has no backup.
Use the TACL command PPD to find out about the process. If the backup does
not exist but you require a backup, use the PROCESS ALTER=process-name
BACKUPCPU=backup-cpu command to create a backup process, then reissue the
PROCESS SWITCH command.
NOT A NNM CONTROLLED PROCESS
You issued a PROCESS ALTER or PROCESS SWITCH command on a process that
is not a NonStop NET/MASTER MS process.
PROCESS IS NOT RUNNING
You issued the PROCESS SWITCH command on a process that does not exist.
PROCESS SWITCHING IN PROGRESS
You issued the PROCESS SWITCH command on a process for which an earlier
PROCESS SWITCH command request is being processed. You can use the TACL
command PPD to check that the primary and backup processes have switched.
STATIC AND DSNM PROCESS ONLY
You tried to alter the preferred CPUs for a security exit process or for a process
that is not static or external. You cannot use the PROCESS ALTER=process-name
CPU command on an NCP GMM, or security exit process.
Effect. The operation is not performed on the process.
Recovery. Use the error text to determine the appropriate action to take.
NNM0585 PRIMARY AND BACKUP OF process-name SWITCHED
Cause. A PROCESS SWITCH command reversed the role of the primary and backup
process of the NonStop NET/MASTER MS process pair.
process-name is the name of the process affected.
Effect. The role of the primary and backup process of the pair is reversed.
Recovery. This message is informational only; no recovery action is necessary.