NET/MASTER Messages Manual

NNM0608
Messages
2–126 106159 Tandem Computers Incorporated
NNM0608 statusinfo
Cause. The message displays the status information about the NonStop
NET/MASTER MS system in response to a STATUS command.
statusinfo contains the following status information:
SYSTEM STATUS AS AT current-time
gives the time at which the status information is obtained.
NONSTOP KERNEL VERSION: version-number
gives the version number of the operating system.
SYSTEM STATE: system-status
gives the status of the NonStop NET/MASTER MS system.
system-status is one of the following:
NCL INIT indicates that the INIT NCL procedure is executing.
NCL READY indicates that the READY NCL procedure is executing.
RUNNING indicates that NonStop NET/MASTER MS is running.
SHUTDOWN PENDING indicates that NonStop NET/MASTER MS is shutting
down. You can use the SHUTDOWN CANCEL
command to cancel the shutdown.
STOPPING indicates that NonStop NET/MASTER MS is stopping.
You cannot cancel the shutdown.
SYSTEM WAS INITIALISED ON init-day init-date AT init-time
gives the day, date, and time when NonStop NET/MASTER MS was initialized.
SYSTEM NAME: system-name
gives the name of the operating system.
SYSTEM DOMAIN ID: domain-id
gives the domain ID of the NonStop NET/MASTER MS system.
SYSTEM ID: system-id
gives the NonStop NET/MASTER MS system identifier.
SYSTEM NETNAME: network-name
gives the NonStop NET/MASTER MS network name.
CONTROL PROCESS NAME: process-name , CPUS: cpu1 cpu2
gives the name of the NonStop NET/MASTER MS control process, and the
primary and backup CPU numbers.