NET/MASTER Messages Manual

NNM0608
Messages
106159 Tandem Computers Incorporated 2–127
CONTROL PROCESS OBJECT FILE: object-name
gives the name of the NCP object file.
CONTROL PROCESS HOMETERM: device-name
gives the device name of the terminal from which the NCP was started.
log-status
gives the status of the activity log:
CURRENT ACTIVITY LOG FILE = file-name
indicates that the activity log is available and gives the name of the current
activity log file.
LOG SUBSYSTEM INACTIVE - NO AVAILABLE LOG FILES
indicates that the activity log is not available.
LOGPROC file-name IS logproc-status
gives the status of the LOGPROC NCL procedure. l ogproc-status is either
LOADED (LOGPROC used) or NOT LOADED (LOGPROC not used). The NCL
procedure file name appears if logproc-status is LOADED.
EMSPROC file-name IS emsproc-status
gives the status of the EMSPROC NCL procedure. emsproc-status is either
LOADED (EMSPROC used) or NOT LOADED (EMSPROC not used). The NCL
procedure file name appears if emsproc-status is LOADED.
EMS DISTRIBUTOR distributor-status
gives the status of the EMS distributor. distributor-status is either
STARTED (being started) or STOPPED. When the distributor completes the start
operation, the message becomes EMS DISTRIBUTOR STARTED, PROCESS NAME
process-name ., giving the name of the distributor process.
EMS COLLECTOR collector-status
gives the status of the EMS collector. collector-status is either STARTED or
STOPPED.
CNM SSCP sscp-status
gives the status of the SSCP. s scp-status is either STARTED or STOPPED.
active-link-count REMOTE LINKS ACTIVE, inactive-link-count
INACTIVE.
gives the number of active and inactive links.
PROCESS ACCESSOR ID: guardian-user-id
gives the ID of the user that has control of the NonStop NET/MASTER MS
processes.